Přihlašovací formulář
Přihlašovací jméno
Přihlašovací heslo




Zapomenuté heslo|Zaregistrovat se
Osobní údajeObjednávkyPorovnáníOblíbenéReklamaceOdhlášení
cz
CZK
Textové stránky
    cz
    CZK
    Zpět
    1. Hlavní stránka
    2. IT
    3. Síťové prvky
    4. Switche

    Cisco switch CBS350-12XT-EU (10x10GbE,2x10GbE/SFP+ combo)

    Provedení:Rack mounted 19"; Funkce:QoS (Quality of service), VLAN (virtual local area network), DHCP snooping, Stohovatelnost, L2, L3, Web management/Smart switch; Technologie:10 Gigabit Ethernet, 10 Gigabit ethernet + 10 Gigabit optika; Počet portů LAN:10; Počet SFP+ portů:2; Počet portů Combo:2; Ventilátor; Přenosová rychlost LAN (Mb/s):10000.

    Kód produktu839942
    Part numberCBS350-12XT-EU
    EAN produktu889728327121
     
    Záruka:0 Om.Doživot
    Výrobce:Cisco
    Skladová dostupnost:Na dotaz
    Vaše cena bez DPH
    29795.87 Kč
    Vaše cena včetně DPH
    36053 Kč






    Přidat produkt k porovnání >
    Popis
    Parametry

    Cisco switch CBS350-12XT-EU

    Řízené switche řady Cisco Business 350 jsou spolehlivými stavebními prvky pro sítě malých firem. Díky intuitivnímu ovládacímu panelu, pokročilým funkcím a všudypřítomnému zabezpečení urychlují spravované switche řady Cisco Business 350 vaši digitální transformaci.

    Stránky produktu: CBS350-12XT-EU
    Quick start guide: Quick start guide
    Switching capacity and forwarding rate (All switches are wire speed and nonblocking)
    Capacity in Millions of Packets per Second (mpps) (64-byte packets) 178.56
    Switching Capacity in Gigabits per Second (Gbps) 240
    Layer 2 switching
    Spanning Tree Protocol (STP) Standard 802.1d Spanning Tree support
    Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
    Multiple Spanning Tree instances using 802.1s (MSTP); 8 instances are supported
    Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported
    Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
    Up to 8 groups
    Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
    VLAN Support for up to 4,094 VLANs simultaneously
    Port-based and 802.1Q tag-based VLANs; MAC-based VLAN; protocol-based VLAN; IP subnet-based VLAN
    Management VLAN
    Private VLAN with promiscuous, isolated, and community port
    Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks
    Guest VLAN, unauthenticated VLAN
    Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication
    CPE VLAN
    Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers network wide zero-touch deployment of voice endpoints and call control devices
    Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR)
    VLAN Translation Support for VLAN One-to-One Mapping. In VLAN One-to-One Mapping, on an edge interface customer VLANs (C-VLANs) are mapped to service provider VLANs (S-VLANs) and the original C-VLAN tags are replaced by the specified S-VLAN
    Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers
    Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs
    Selective Q-in-Q also allows configuring of Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag
    Layer 2 protocol tunneling over Q-in-Q is also supported
    Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain
    Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and black holing of traffic in switched networks
    Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82
    Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 2K multicast groups (source-specific multicasting is also supported)
    IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
    IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols.
    Head-of-Line (HOL) blocking HOL blocking prevention
    Loopback Detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
    Layer 3
    IPv4 routing Wirespeed routing of IPv4 packets
    Up to 990 static routes and up to 128 IP interfaces
    IPv6 routing Wirespeed routing of IPv6 packets
    Layer 3 Interface Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface
    Classless Interdomain Routing (CIDR) Support for classless interdomain routing
    RIP v2 Support for Routing Information Protocol version 2 for dynamic routing
    Policy-Based Routing (PBR) Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL)
    DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes
    Support for DHCP options
    DHCP relay at Layer 3 Relay of DHCP traffic across IP domains
    User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
    Stacking
    Hardware stacking Up to 4 units in a stack. Up to 200 ports managed as a single system with hardware failover
    High availability Fast stack failover delivers minimal traffic loss. Support link aggregation across multiple units in a stack
    Plug-and-play stacking configuration/management Active/standby for resilient stack control
    Autonumbering
    Hot swap of units in stack
    Ring and chain stacking options, auto stacking port speed, flexible stacking port options
    High-speed stack interconnects Cost-effective high-speed 10G fiber interfaces.
    Security
    ecure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported
    Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
    IEEE 802.1X (Authenticator role) 802.1X: Remote Authentication Dial-In User Service (RADIUS) authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions
    Supports time-based 802.1X; dynamic VLAN assignment; MAC authentication
    IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms)
    Web-based authentication Web-based authentication provides network admission control through web browser to any host devices and operating systems
    STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops
    STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes
    STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops)
    DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers.
    IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing.
    Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks.
    IP/MAC/Port Binding (IPMB) The preceding features (DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection) work together to prevent DOS attacks in the network, thereby increasing network availability
    Secure Core Technology (SCT) Makes sure that the switch will receive and process management and protocol traffic no matter how much traffic is received
    Secure Sensitive Data (SSD) A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch, populating this data to other devices, and secure autoconfig. Access to view the sensitive data as plaintext or encrypted is provided according to the user-configured access level and the access method of the user.
    Trustworthy systems Trustworthy systems provide a highly secure foundation for Cisco products
    Run-time defenses (Executable Space Protection [X-Space], Address Space Layout Randomization [ASLR], Built-In Object Size Checking [BOSC])
    Private VLAN Private VLAN provides security and isolation between switch ports, which helps ensure that users cannot snoop on other users’ traffic; supports multiple uplinks
    Layer 2 isolation Private VLAN Edge (PVE) PVE (also known as protected ports) provides Layer 2 isolation between devices in the same VLAN, supports multiple uplinks
    Port security Ability to lock source MAC addresses to ports and limits the number of learned MAC addresses
    RADIUS/TACACS+ Supports RADIUS and TACACS authentication. Switch functions as a client
    RADIUS accounting The RADIUS accounting functions allow data to be sent at the start and end of services, indicating the amount of resources (such as time, packets, bytes, and so on) used during the session
    Storm control Broadcast, multicast, and unknown unicast
    DoS prevention Denial-of-Service (DOS) attack prevention
    Multiple user privilege levels in CLI Level 1, 7, and 15 privilege levels
    ACLs Support for up to 1,024 rules
    Drop or rate limit based on source and destination MAC, VLAN ID, IPv4 or IPv6 address, IPv6 flow label, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, Transmission Control Protocol/User Datagram Protocol (TCP/UDP) source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag; ACL can be applied on both ingress and egress sides
    Time-based ACLs supported
    Quality of Service
    Priority levels 8 hardware queues
    Scheduling Strict priority and Weighted Round-Robin (WRR)
    Class of service Port based; 802.1p VLAN priority-based; IPv4/v6 IP precedence/Type of Service (ToS)/DSCP-based; Differentiated Services (DiffServ); classification and remarking ACLs, trusted QoS
    Queue assignment based on DSCP and class of service (802.1p/CoS)
    Rate limiting Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based; 2R3C policing
    Congestion avoidance A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization
    iSCSI traffic optimization A mechanism for giving priority to iSCSI traffic over other types of traffic
    Standards
    IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad Link Aggregation Control Protocol, IEEE 802.3z Gigabit Ethernet, IEEE 802.3ae 10 Gbit/s Ethernet over fiber for LAN, IEEE 802.3an 10GBase-T 10 Gbit/s Ethernet over copper twisted pair cable, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w Rapid STP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, IEEE 802.1AB Link Layer Discovery Protocol, IEEE 802.3az Energy Efficient Ethernet, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 826, RFC 879, RFC 896, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 920, RFC 922, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1157, RFC 1213, RFC 1215, RFC 1286, RFC 1350, RFC 1442, RFC 1451, RFC 1493, RFC 1533, RFC 1541, RFC 1542, RFC 1573, RFC 1624, RFC 1643, RFC 1700, RFC 1757, RFC 1867, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2030, RFC 2131, RFC 2132, RFC 2233, RFC 2576, RFC 2616, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 3164, RFC 3176, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 3416, RFC 4330
    IPv6
    IPv6 IPv6 host mode; IPv6 over Ethernet; Dual IPv6/IPv4 stack
    IPv6 neighbor and router discovery (ND); IPv6 stateless address autoconfiguration; Path Maximum Transmission Unit (MTU) discovery
    Duplicate Address Detection (DAD); ICMP version 6
    DHCPv6 stateful client
    IPv6 over IPv4 network with Intrasite Automatic Tunnel Addressing Protocol (ISATAP) tunnel support
    USGv6 and IPv6 Gold Logo certified
    IPv6 QoS Prioritize IPv6 packets in hardware
    IPv6 ACL Drop or rate limit IPv6 packets in hardware
    IPv6 First Hop Security RA guard
    ND inspection
    DHCPv6 guard
    Neighbor binding table (snooping and static entries)
    Neighbor binding integrity check
    Multicast Listener Discovery (MLD v1/2) snooping Deliver IPv6 multicast packets only to the required receivers
    MLD proxy The MLD proxy provides a mechanism for multicast forwarding based on MLD membership information without the need for more complicated multicast routing protocols.
    IPv6 applications Web/SSL, Telnet server/SSH, ping, traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), SNMP, RADIUS, syslog, Domain Name System (DNS) client, Telnet Client, DHCP Client, DHCP Autoconfig, IPv6 DHCP Relay, Terminal Access Controller Access Control System Plus (TACACS+)
    IPv6 RFCs supported RFC 4443 (which obsoletes RFC2463): ICMP version 6
    RFC 4291 (which obsoletes RFC 3513): IPv6 address architecture
    RFC 4291: IPv6 addressing architecture
    RFC 2460: IPv6 specification
    RFC 4861 (which obsoletes RFC 2461): neighbor discovery for IPv6
    RFC 4862 (which obsoletes RFC 2462): IPv6 stateless address autoconfiguration
    RFC 1981: path MTU discovery
    RFC 4007: IPv6 scoped address architecture
    RFC 3484: default address selection mechanism
    RFC 5214 (which obsoletes RFC 4214): ISATAP tunneling
    RFC 4293: MIB IPv6: textual conventions and general group
    RFC 3595: textual conventions for IPv6 flow label
    Management
    Cisco Business Dashboard Support for embedded probe for Cisco Business Dashboard running on the switch. Eliminates the need to set up a separate hardware or virtual machine for the Cisco Business Dashboard Probe on site.
    Cisco Business mobile app Mobile app for Cisco Business Switch and Wireless products. Helps to set up a local network in minutes and provide easy management at your fingertips.
    Cisco Network Plug and Play (PnP) agent The Cisco Network Plug and Play solution provides a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or for provisioning updates to an existing network. The solution provides a unified approach to provision Cisco routers, switches, and wireless devices with a near-zero-touch deployment experience
    Supports Cisco PnP Connect
    Web user interface Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS).
    Supports simple and advanced mode, configuration, wizards, customizable dashboard, system maintenance, monitoring, online help, and universal search
    SNMP SNMP versions 1, 2c, and 3 with support for traps, and SNMP version 3 User-based Security Model (USM)
    Remote Monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis
    IPv4 and IPv6 dual stack Coexistence of both protocol stacks to ease migration
    Firmware upgrade Web browser upgrade (HTTP/HTTPS) and TFTP and upgrade over SCP running over SSH
    Dual images for resilient firmware upgrades
    Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to one destination port.
    VLAN mirroring Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 8 source VLANs can be mirrored to one destination port.
    Flow-based redirection and mirroring Redirect or mirror traffic to a destination port or mirroring session based on flow
    Remote Switch Port Analyzer (RSPAN) Traffic can be mirrored across Layer 2 domain to a remote port on a different switch for easier troubleshooting
    sFlow agent Switch can export sFlow sample to external collectors. sFlow provides visibility into network traffic down to flow level
    DHCP (options 12, 59, 60, 66, 67, 82, 125, 129, and 150) DHCP options facilitate tighter control from a central point (DHCP server) to obtain IP address, autoconfiguration (with configuration and image file download), DHCP relay, and hostname
    Secure Copy (SCP) Securely transfer files to and from the switch
    Autoconfiguration with Secure Copy (SCP) file download Enables secure mass deployment with protection of sensitive data
    Text-editable config files Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment
    Smartports Simplified configuration of QoS and security capabilities
    Auto Smartports Applies the intelligence delivered through the Smartport roles and applies it automatically to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero-touch deployments
    Textview CLI Scriptable command-line interface. A full CLI as well as a menu-based CLI is supported. User privilege levels 1, 7, and 15 are supported for the CLI
    Localization Localization of GUI and documentation into multiple languages
    Login banner Configurable multiple banners for web as well as CLI
    Other management Traceroute; single IP management; HTTP/HTTPS; SSH; RADIUS; port mirroring; TFTP upgrade; DHCP client; BOOTP; SNTP; Xmodem upgrade; cable diagnostics; ping; syslog; Telnet client (SSH secure support); automatic time settings from Management Station
    Green (power efficiency)
    Energy Detect Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link up
    Cable length detection Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables.
    EEE Compliant (802.3az) Supports IEEE 802.3az on all copper Gigabit Ethernet ports
    Disable port LEDs LEDs can be manually turned off to save on energy
    Time-based port operation Link up or down based on user-defined schedule (when the port is administratively up)
    Time-based PoE PoE power can be on or off based on user-defined schedule to save energy
    General
    Jumbo frames Frame sizes up to 9K bytes. The default MTU is 2K bytes
    MAC table 16K addresses
    Discovery
    Bonjour The switch advertises itself using the Bonjour protocol
    Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED extensions LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones
    Cisco Discovery Protocol The switch advertises itself using the Cisco Discovery Protocol. It also learns the connected device and its characteristics via Cisco Discovery Protocol
    Hardware
    Power Consumption (worst case)
    System power consumption 110V=63.9W
    220V=64.1
    Heat dissipation (BTU/hr) 218.7
    Ports
    Total system ports 10 x 10G copper + 2 x 10G copper/SFP+ combo + 1 x GE OOB management
    RJ-45 ports 10 x 10G copper
    Combo ports (RJ-45 + SFP) 2 x 10G copper/SFP+ combo
    Console port Cisco standard RJ45 console port
    USB slot USB Type-A slot on the front panel of the switch for easy file and image management
    Buttons Reset button
    Cabling type Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T
    LEDs System, Link/Act, PoE, Speed
    Flash 256 MB
    CPU 800 MHz ARM
    DRAM 512 MB
    Packet Buffer
    Packet buffer (All numbers are aggregate across all ports as the buffers are dynamically shared:) 3 MB
    Supported SFP modules
    SKU Media
    MGBSX1 Multimode fiber
    MGBLX1 Single-mode fiber
    MGBLH1 Single-mode fiber
    MGBT1 UTP cat 5e
    GLC-SX-MMD Multimode fiber
    GLC-LH-SMD Single-mode fiber
    GLC-BX-U Single-mode fiber
    GLC-BX-D Single-mode fiber
    GLC-TE UTP cat 5e
    SFP-H10GB-CU1M Copper coax
    SFP-H10GB-CU3M Copper coax
    SFP-H10GB-CU5M Copper coax
    SFP-10G-SR Multimode fiber
    SFP-10G-LR Single-mode fiber
    SFP-10G-SR-S Multimode fiber
    SFP-10G-LR-S Single-mode fiber
    Environmental
    Unit dimensions (W x D x H) 440 x 203 x 44 mm (17.3 x 8.0 x 1.73 in)
    Unit weight 2.93 kg (6.46 lb)
    Power 100-240V 50-60 Hz, internal, universal
    Certifications UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A
    Operating temperature 32° to 122°F (0° to 50°C)
    Storage temperature -13° to 158°F (-25° to 70°C)
    Operating humidity 10% to 90%, relative, noncondensing
    Storage humidity 10% to 90%, relative, noncondensing
    Acoustic Noise and Mean Time Between Failure (MTBF)
    Fan (number) 2
    Acoustic noise 25°C: 40.5 dB
    MTBF @ 25°C (hours) 633324
    Warranty
    Limited lifetime with next business day advance replacement
    Package contents
    Cisco Business 350 Series Managed Switch
    Power cord
    Mounting Kit
    Quick Start Guide
    Minimum Requirements
    Web browser: Chrome, Firefox, Edge, Safari
    Category 5e Ethernet network cable
    TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed
    .
    Maximální počet portů: 10
    Technologie: 10 Gigabit ethernet + 10 Gigabit optika
    Technologie: 10 Gigabit Ethernet
    Management: Web
    Management: SNMP/RMON
    Provedení: Rack mounted 19"
    Přenosová rychlost LAN (Mb/s): 10000
    Funkce: L2
    Funkce: Web management/Smart switch
    Funkce: QoS (Quality of service)
    Funkce: VLAN (virtual local area network)
    Funkce: DHCP snooping
    Funkce: L3
    Funkce: Stohovatelnost
    Počet portů Combo: 2
    Počet SFP+ portů: 2
    Počet portů LAN: 10
    Ventilátor: Ano